Useful Tips

Resetting Windows 7 to Factory Settings

Pin
Send
Share
Send
Send


Following the tips in this guide, each user will be able to roll back the OS without any hassle or hindrance. Here are the most relevant and valid reset methods. Windowsthat you won’t find anywhere else. The advice information was compiled by Windows repair and tuning specialists.

Computer owners are often faced with the need to roll back to the factory settings of the operating system Windows with complete erasure of all data. Performing such actions may be required in several cases:

  • Selling a computer.
  • System software failure.
  • Installation of incorrect drivers, programs.
  • Loss of performance.
  • Clogged up with remnants of previously installed applications.
  • System crash caused by virus.

Only probable reasons for system rollback are listed. Windows 7 to factory settings. There are other reasons for this undertaking. To complete reset Windows 7, follow the directions in this tutorial, and the process will be much faster and more productive.

If you decide to reset your computer, you need to take care of your data stored on the hard drive, which were accumulated during the use of the Windows system. This is very important because, in addition to files, the system stores program and password data, so simply formatting the hard drive is not enough. In addition to personal data, videos, photos and music, you must separately save additional program files, without which the software will not be able to function. A vivid example of this, the program Keeper from Web money, which cannot be launched without a special file, which will result in loss of access to your wallets with all the means on them. Therefore, the reset must be carried out thoroughly prepared.

Additional manipulations

Partition situations like this happen quite often, so don’t worry if you can’t restore the configuration to its original state in a regular way. You can recover data without reinstalling the system using a USB flash drive or other media on which the Windows installation package is unpacked. Removable storage must be prepared and formatted beforehand. Fat 32. Creating a recovery card must be done through a previously downloaded system image, which using the program Nero or Ultra Iso is deployed to the media. Now you need to insert the card into the USB-connector and restart the computer. When rebooting, you need to boot the system from the memory card, not from the hard drive.

To do this, press the key several times in a row F8until a small menu appears with a suggestion to download available systems on media connected to the system unit. If you cannot call the boot menu, you need to go into the BIOS and specify the boot with USB. Thus, the next start will not begin with the hard drive, but with removable media. Instead of reinstalling, you need to select the recovery mode, which will restore the factory settings of Windows. This method may not delete all the data, so in case of failure, the installation memory card can be used in the future to reinstall, but more on that later in the article.

Erasing Windows data with third-party applications

Resetting parameters and system resources on laptops is carried out almost like on a PC. The only difference is the key combination that must be pressed to bring up the menu during reboot. Most models use Ctrl + F12, F8, F9, F10, depending on the manufacturer and model.

In this way, a full factory configuration is returned. If the system remains incomplete, you can perform a reinstall. To do this, you need a pre-prepared installation card or a Windows distribution disk. You can use the assembly or license, the process is identical in both cases.

Supporting Resources

Among all the rollback methods Windows 7 There are additional packages that help roll back the system to factory settings. These are pre-created points that other users have produced that they wish to share with others. The return package may consist of a standard layout or additional utilities that will be needed to complete the installation.

First you need to download the finished image and copy the contents to a card or hard drive, depending on how you created the rollback point. If you can’t find or create such an installer among your friends, you can turn to other people on the Internet who can give you a predefined point for resetting the resources of the installed operating system. Fortunately, the network capabilities make it possible to perform the procedure very simply using a file hosting service.

Reset Methods

There are several methods for resetting Windows to factory conditions. First of all, you should decide how exactly you want to reset: return the initial settings only to the operating system, or, in addition, completely clear the computer of all installed programs. In the latter case, all data from the PC will be completely deleted.

Method 1: “Control Panel”

You can reset Windows settings by running the tool required for this procedure through "Control Panel". Before activating this process, be sure to backup the system.

  1. Click "Start". Go to "Control Panel".

In block "System and safety" choose an option "Archiving computer data".

In the window that appears, select the lowest item Restore System Settings.

  • A window opens containing two options:
    • "Use a system image",
    • Reinstall Windows or "Return the computer to the state specified by the manufacturer".

    Choose the last item. As you can see, it can have a different name on different PCs, depending on the parameters set by the computer manufacturer. If your name is displayed "Return the computer to the state specified by the manufacturer" (most often this option happens with laptops), then you just need to click on this inscription. If the user sees the item Reinstall Windows, then before clicking on it, you need to insert the OS installation disk into the drive. It is worth noting that this should be exclusively the instance of Windows that is currently installed on the computer.

  • Whatever the name of the above item is, after clicking on it, the computer reboots and the system is restored to the factory settings. Do not be alarmed if the PC restarts several times. After completion of the indicated process, the system parameters will be reset to the initial ones, and all installed programs will be deleted. But the previous settings can still be returned if desired, since files deleted from the system will be transferred to a separate folder.
  • Method 2: Recovery Point

    The second method involves using a system restore point. In this case, only the system settings will be changed, and the downloaded files and programs will remain intact. But the main problem is that if you want to reset the settings to the factory settings, in order to do this, you need to create a restore point as soon as you purchase a laptop or install the OS on a PC. And not all users do this.

      So, if there is a recovery point created before starting to use the computer, then go to the menu "Start". Choose "All programs".

    Go to the folder "Service".

    In the directory that appears, look for the position "System Restore" and click on it.

    The selected system utility starts. The OS recovery window opens. Just click here "Further".

    Then a list of recovery points opens. Be sure to check the box next to Show other recovery points. If there is more than one option, and you do not know which one to choose, although you are firmly convinced that you created a point with factory settings, then in this case, select the item that is the earliest by date. Its value is displayed in the column. "Date and time". Having selected the corresponding item, press "Further".

    In the next window, you only need to confirm that you want to roll back the OS to the selected recovery point. If you have confidence in your actions, then click Done.

  • After that, the system reboots. Perhaps it will happen several times. After completing the procedure, you will receive a functioning OS with factory settings on the computer.
  • As you can see, there are two options to reset the state of the operating system to the factory settings: by reinstalling the OS and returning the settings to the previously created recovery point. In the first case, all installed programs will be deleted, and in the second, only system parameters will be changed. Which of the methods to use depends on a number of reasons. For example, if you did not create a recovery point immediately after installing the OS, then you only have the option that was described in the first method of this guide. In addition, if you want to clean your computer from viruses, then this method is also suitable. If the user does not want to reinstall all the programs that are on the PC, then you need to act in the second way.

    Thank the author, share the article on social networks.

    Built-in reset option in Windows 10

    This reset was once a rather complicated process, but Microsoft worked on it and introduced a simplified version in Windows 8. The same option is used in Windows 10. It will be the best option for most people.

    To access this option, open “Options”, and then “Update and Security” and “Recovery”. Here you should see the item "Return the computer to its original state." Click the Start button to complete this action. That's all!

    Save or delete all files?

    There are two options: save files or delete everything. The first option rolls back all the settings to the original. All installed applications (browsers, games) are deleted along with the settings. But personal files are saved.

    In the second option, the settings are rolled back to the factory settings, and all personal files are completely deleted. You will need to select one of the options in the menu that appears.

    Although selecting the option “Save my files” allows you not to delete the information, it is still recommended to make a backup copy first. If suddenly something goes wrong, it is always better to have a backup option on hand.

    If you selected “Delete All,” Windows will prompt you to select one of two items:

    In the second case, the files will be deleted permanently. The whole process will take more time. This option is recommended to choose if you are selling a computer or giving it to someone for long-term use. Otherwise, it is better to select "Just delete files."

    By selecting “Save my files”, you will see a list of applications to be deleted. After the computer restarts, this list will remain on the desktop. This will make it easier to remember which components need to be reinstalled.

    Having decided on all the parameters, click "Reset" and wait for the process to complete. Make sure that the laptop’s battery is sufficiently charged since it takes a long time to return the computer to its original state.

    New Start option in Windows 10

    In the Windows 10 Creators Update, Microsoft added a new option to reset the computer to the factory settings. The process is similar to that described above, but has a few minor differences.

    Open Options, then Update and Security and Recovery. Now select “Windows Defender Security Center” and go to the “Device Health” section.

    The inscription “New Launch” should be at the bottom of the window. To start the process, click the "Next" button.

    Compared to the method described above, “New Launch” has the following differences:

    • Personal files are always saved without the possibility of deleting them. Only some programs are erased.
    • The latest version of Windows 10 is loading. A standard reset uses information to restore the system from the hard drive. It is provided by the PC manufacturer or stored in a protected folder C: Recovery.
    • “New Launch” allows you to avoid clutter by removing all non-standard Windows applications, including malware.
    • Some operating system settings are saved. But it is not indicated which ones.

    Summarize. New Startup downloads a new copy of the latest version of Windows 10, saves your files and some settings, and also leaves no malware. The standard reset option allows you to choose whether to save files and settings or not.

    Reinstalling using a Windows image

    If you are not using Windows 8 or 10, or if the reset methods described above are not suitable for any reason, you can restore Windows to the factory settings using the USB installation media. This will install a new copy of Windows on the computer and delete all previous information.

    If you want to reinstall Windows 7 from scratch, you can use the Microsoft OS boot tool, which allows you to download the ISO to burn to a flash drive or DVD, which can then be used to reinstall the operating system. Also for this you will need to enter the license key for Windows 7.

    Additional settings

    For most users, the reset methods described above will suffice. But there are several advanced options.

    One of these methods is to use an OS image, which is a full-fledged snapshot of Windows. If you created a Windows system image, you can restore it from the advanced settings menu. To do this, go to “Settings”, and then “Update and Security” and “Recovery”.

    You can also boot into the BIOS and access the recovery partition on your hard drive, if the PC manufacturer has provided this option. But when resetting using this method, malware is not removed.

    Another option is to create a recovery disc from the Start menu. However, this requires quite a lot of hard disk space.

    General points

    Personal computer failure can occur due to a large number of reasons. The very first such reason is the presence of virus programs that not only clog the computer's memory, but also destroy its files and documents. How to restore the computer to factory settings?

    When this situation happens, the best and alternative installation of the operating system is to automatically reset Windows to the factory settings that were received in the store. This option will simplify the work of restoring the operating system. He will reset it completely, will fix the problems and install a new operating system. But not all computers have an automatic reset, so some will need to manually reinstall the system.

    In the event that the system is manually reinstalled, it is necessary to transfer all available information from the computer to other media, since at the time of reinstallation the information may be lost. There is a possibility of information recovery, if suddenly this happens, but not everyone can do this and not always such an opportunity exists.

    If you decide to install an autonomous heating system at home, we recommend that you read this article. We talk about the heating convector here.

    The question of how to return the computer to factory settings also worries users in other moments, not only in case of breakdowns. And here users are asking themselves the task of how to reset the computer to the factory settings, because this is the best option in many cases.

    There are times when resetting your Windows 7 system will be useful to your computer.

    The first point is the sale of a computer. It will be very convenient for the new owner to get a computer with factory settings, as in a store.

    The second point is the transfer of a personal computer to another employee in the organization.

    The third point is the slow operation of the computer, the drivers stop loading, some programs work.

    And in these few moments it is precisely such an attitude that is applied. And now, having learned several causes of breakdowns and malfunctions, it is time to learn how to fix them. The question is, how to return Windows 7 to factory settings?

    There are three options for restoring your computer to factory settings.

    Immediately make a reservation - a complete reset of the system is not always required. To save time and effort, you can try simpler options first.

    Troubleshooting Methods

    The very first way to resolve errors is to download a successful configuration.

    The next option is obtained if the computer supports the built-in Windows recovery function.

    And the third way is to use the system boot disk. Most users should know how to use any troubleshooting steps. This article offers a more detailed look at these three ways on how to make factory settings on a computer.

    What should be done

    So, the first way. Загрузка последней удачной конфигурации. Такой метод считается очень простым, поэтому его освоить сможет даже самый неуверенный пользователь персонального компьютера.Before starting Windows 7, you must use the F8 button and select the phrase "last successful configuration". At this point, the system will restore the previous version of the computer, which was the most successful and successful. This action will return all working system files.

    If just a simple reboot of a successful configuration does not help, then right there you can restore the system using restore points. They are fixed at certain points in any state of the program and, choosing the most successful point, you can try to restore Windows 7. Such recovery points can be done independently or set the frequency of automatic saving in the settings of a personal computer.

    Important! On some computers, automatic recovery point creation is disabled by default. We recommend that you enable it, as it may help in future troubleshooting.

    The following method suggests using the system boot disk. This option is used for more serious problems of the Windows 7 system. Basically, this is a strong defeat of the computer with virus files. Only a disk can help here, which will help restore the computer's operating system. When safe mode is enabled on the computer, you need to click on the item from the menu "troubleshooting on your computer", after which you need to insert the disk. In the open window, select the "restore system" function. The program will offer different recovery options. All of them are almost identical, so the choice is up to the user. The recovery procedure is the same as working with applications. But an important feature of disk usage is the exclusion of the effects of viruses on personal software. Disk manufacturers also provide special instructions that help you figure out and properly reset the system. The principle of such programs is almost the same, so one disk will be enough to study such a moment as returning the computer to the factory settings.

    If nothing helps

    If all of the above options do not help restore the computer and do not give positive results, then you can make a complete reset of the entire system. Some models of computers and laptops contain system partitions with a copy of their basic Windows 7 software. There is no single recommendation on how to start this procedure. As a rule, at the moment the computer is turned on, a hint lights up at the bottom of the screen indicating the main active keys. If there is an F (number) for recovery item, feel free to press the indicated button and follow the instructions. If there is no such item, then we recommend that you read the documentation on your computer. It should indicate which keys start this procedure.

    If all the recommendations do not help and the computer refuses to work as before, we recommend that you contact a specialist. Always remember that in the event of a more serious breakdown, there is a risk of causing even greater damage if you do not follow the instructions at your own risk.

    Pin
    Send
    Share
    Send
    Send